The structure located at 98 John St. East was the home of the Collings family years ago. The large, two-storey, frame and stucco-clad house has a long shed at the back that was once used for automobile storage (and later as a utilities room). Before World War II, there was a small building used for repairs and a blacksmith shop located east of the house. Along the lane fence at the south end of the property was a large, one-storey building used for storing marsh hay. South of the main house was a cement sidewalk that led to Holland Street. There was a garden (and later, grass) on each side of the house. Originally, the family owned a horse stable located at 100 John St. East. Bill Peters and his wife were housekeepers for Ernie Collings Sr. when he lived here around 1907. Ernie owned marshland on the west side of the Holland River at the 10th Line. Years later the house was bought by James Armstrong and his wife Jane (Saint). Jim was a marsh hay worker and he owned land above the 10th Line on the west side of the river. Jim was an implement sales man on Holland Street (around the time of WWII) after marsh haying was finished. He also ran a garage at 11 Holland St East with Fred Gregory after Dennis Nolan closed his garage. Jim and Jane raised their daughters in this house. Daughter Shirley and her husband Bill Watson remained in the house after Jim and Jane died, but it was eventually sold. (1, 2)
This structure faces Mary Street and is located at the rear of the former Winchester Arms Restaurant (on the southwest corner of Holland and Barrie Streets). Green, board and batten cladding had been added since the photo was taken in 1995 or 1996. (1)
Alex Sutherland’s bakeshop was located at 27 Simcoe Road for many years. It was later sold to Howard Bowser. Howard converted it into a rental dwelling. The building was eventually owned by a market gardener who had a cement garage and storage building constructed by Len Saint on the property. Neil Lathangue and his wife lived here for a time years later. After they left, Tommy and Bill Whiteside moved in and remained here until they died. (1, 2)
The building located at 30 Simcoe Road was known as the Lathangue & Skwarchuk Funeral Home when this photo was taken in 1995. The Kilkenny family was the first to serve Bradford with a funeral home in 1836. Neil Lathangue owned the business from 1950-1963. Mac Lewis was the owner from 1963-1973. He brought Bill Skwarchuk into the business in 1968. Today (2017), the funeral home is owned by Bill Skwarchuk and his family. (1, Skwarchuk Funeral Home web site)
The mid-block building located at 52 Simcoe Road was built post-1900 (1902?) in the Gothic Revival Cottage style. The house, which is larger than other older cottages of a similar style in Bradford, was built on property owned by Charles Adams. Originally, there was a garden to the west and a barn on the lane. Later residents of this house included Joe Brown (a retired farmer from the 10th line) and Jessie, who lived here until he died. Joe was a noted gardener who raised his granddaughter Margaret Turner. Paul Margetiak and his wife and son also lived here at one time. He was a gardener, too, and he built a garage on the property. Len Saint did the cement work and added a closed-in porch. Eventually the property was bought by Gary Swagerman. He lived in the house with his wife and family and eventually had the barn remodelled to become the site of a dry cleaner. The garden was paved and used as a parking lot for the business. The 1½-storey, three-bay cottage has a rectangular plan, a centre hall, and a symmetrical façade. The medium-pitched, gable roof has a centre gable over the entrance. There are single windows to the primary rooms on each side of the covered entrance porch. A raised, open porch has a hip roof supported on simple, wood columns set directly on the porch base/foundation. The porch has a simple, wood handrail and balusters. A single entrance door is set into a segmented, arched opening. Windows are set into segmented, arched openings with brick voussoirs and concrete lug sills. The windows and door are not original. A second-storey window set halfway into the centre gable is a reference to the Gothic Revival style. Locally-made bricks were placed by Tom Saint on the wood frame construction. According to the 2000 inventory, the house is in good condition. (1, 2, 3)
"It was up, up and away at Bak's Market on Wednesday, August 21 when the windmill on top of the market was completed. The job of lifting the blades up to the steel stand took only minutes after workmen finished putting the finishing touches on them. (right) The cost of the whole windmill is roughly $15,000 according to proprietor Casey Bak. The blades and shaft alone weigh two tons and will turn at one and a half revolutions per minute when the drive motor is installed."
"It was up, up and away at Bak's Market on Wednesday, August 21 when the windmill on top of the market was completed. The job of lifting the blades up to the steel stand took only minutes after workmen finished putting the finishing touches on them. (right) The cost of the whole windmill is roughly $15,000 according to proprietor Casey Bak. The blades and shaft alone weigh two tons and will turn at one and a half revolutions per minute when the drive motor is installed."
"Liquor store manager Clare Sullivan (left) stands with cashier Herb Taylor at the opening of the new Liquor Control Board outlet on Holland St. W. The store had six customers in the first 15 minutes of business, according to Sullivan, who also said the Monday opening helped by being on the same day prices went up. All stock showed the new price raises."
"A pressure vessel manufactured by Bond Head Welding is seen here starting its route to Toronto. Weighing 18 tons and holding approximately 15,000 gallons the tank was ordered by B.P. Oil. It took two men four weeks to construct the vessel."
"It was up, up and away at Bak's Market on Wednesday, August 21 when the windmill on top of the market was completed. The job of lifting the blades up to the steel stand took only minutes after workmen finished putting the finishing touches on them. (right) The cost of the whole windmill is roughly $15,000 according to proprietor Casey Bak. The blades and shaft alone weigh two tons and will turn at one and a half revolutions per minute when the drive motor is installed."
